Advertisement
Machine Translated by Google
Antenna connection and adjustment
This unit does not have a built-in AM antenna.
Connect and adjust the AM loop antenna.
Connecting and adjusting the AM loop antenna (supplied)
1 Assemble the antenna
insert into the groove
2Connect to the rear of the unit
Firmly insert the
Code for AM loop antenna
3 Try to receive a broadcast station ( page 14), and adjust the
AM loop antenna to a position and angle that minimizes
noise.
ÿ To remove the AM loop antenna , slowly
pull the cord of the loop antenna.
Adjusting the FM whip antenna
Adjust length and orientation.
please
The speakers of this unit are not designed to be magnetically
shielded. Do not place it near a TV, computer, etc.
Click
AM
ON
For correct transmission • Do
not place any obstacles between the receiver and the remote control.
• Be careful of dust on the light receiving part and the tip of the remote
control. • Do not expose the sensor to direct sunlight or strong light from an
To prevent damage to the remote
controller • Do not disassemble or
modify the remote controller. • Do not
place heavy objects on the product. • Do not leave in
direct sunlight. • Do not spill liquids such as juice.
Preparing the remote control
Insert the batteries (included)
•
Insert and correctly
while pressing the spring on the side
How to use the remote control
30ÿ
30ÿ
Within approx. 7 m from the
front (The usable range varies
depending on the angle.)
inverter fluorescent lamp.
2 AA size
Remote control sensor
Transmitter
Notes on s
meaning(
Tsuzuki
ÿ
Before use
Prep
• • • • • • • • •
• • • • • • • • •
Preparations
for
connection
and •
unit
preparations
for
adjusting
the
power
supply
7
RQT6010
Advertisement
