Advertisement
Machine Translated by Google
Connect and
adjust the antenna before operation . ( page 7)
TV audio (1-3 channels only) is received via FM.
FM AM AREA
1
(back) (forward)
2
3 VOLUME
ÿ To select a station
automatically (auto tuning)
• Frequency stops automatically at the station received first.
ÿ Noise in FM stereo
remote control only
When there is
a lot (Only when receiving FM 76.0 to
90 MHz) • The sound will be monaural, but the noise will be reduced and it
will be easier to hear. • Normally, leave "MONO" off.
ÿ To memorize and listen to broadcast stations (area bank)
• If you specify the area you live in and store it in memory, you can easily
can hear (page 24)
news
AM and TV audio are mono. If reception is
difficult, place the antenna near a window and adjust the direction and length of the antenna. ( page 7) About the TV receiving
circuit of this unit
Since it is also used as an FM receiving circuit, FM interference may occur on channels 2 or 3.
Press
Select FM or AM The power turns
on, and "FM" or "AM" lights up.
The reception
position of the TV that you
press to match the frequency is:
FM76.0MHzÿ90.0MHz TV1ch TV2ch TV3ch
Press
(Big)
to adjust volume
(Small)
(return)
FM MODE
(minimum)ÿ
(move on)
Press and hold until the frequency starts
moving, then release
push
FM 76.0 MHz
FM AM each time you press
FM 88.1 MHz
frequency
VOL 20
0ÿ
50ÿ
(max)ÿ
AUTO TUNING
"MONO" lit
MONO
FM 88.1 MHz
(monaural reception mode)
listen
How to use
15
RQT6010
Advertisement
