Advertisement
Machine Translated by Google
Display example) From 6:30 to 7:40
When playing your favorite
source
(24-hour display)
CLOCK
CLOCK
TIMER PLAY
TIMER REC
ON
OFF
0:00ÿÿ 0:00
6:30ÿÿ 0:00
start time
6:30ÿÿ 6:30
6:30ÿÿ 7:40
end time
Timer settings using an external device
Press [P-MD/AUX] and set the source of this
unit to "AUX", then set the connected external
device to operate at the same time as this unit.
please give me.
PLAY
TIMER–PLAY
• You cannot set Wake up timer and Answering
timer at the same time.
• Unless you cancel the timer, the same
Works on time.
ÿ To cancel the wake-up timer Press [ PLAY/REC]
when the power is on to display "TIMER-OFF". To make it work, turn on "PLAY" again. ÿ To check the
settings Press [DISPLAY] on the remote controller when the power is off. Source/start/end time/current
time ÿ source/volume are automatically displayed in this order (approximately 2 seconds each), and
then return to the original display. ÿTo change the settings Turn on the power to change the time,
and perform steps 1 to 4 and 7 on the left.
When changing the
source, turn on the power, press [ PLAY/REC] to display "TIMER-OFF", and then perform steps 5 to
7 on the left. ÿPlaying and recording can be performed even after setting the timer . Be sure to
turn off the power after operation. The timer does not work when the power is on.
Good night timer
remote control only
When the desired time comes, the source will stop playing and the power will turn off.
SLEEP
AUTO OFF
FATHER HOURS
SLEEP
CHARA ENTER CANCEL
DELETE
ABC DEF
SPACE
123
JKL MNO
WRITE THE
456
10
PQRS TUV WXYZ
PGM CLEAR
789
AUX RADIO CD MD
ÿTo cancel the sleep timer Press
[SLEEP] repeatedly until "SLEEP OFF" is displayed. ÿ To
check the remaining time, press [SLEEP] once. The
remaining time is displayed for about 5 seconds. ÿ To
change the set time Press [SLEEP] to display the desired
time.
Good night timer can be used in combination with other timers. The sleep timer always takes
precedence, so make sure your appointment times don't overlap.
news
The sleep timer cannot be used when the timer alarm is set ( page 41).
Timer fader function
Remote control only
Gradually increases/decreases the volume when the
timer is activated. Only the good night timer is gradually
decreasing. Use in combination with wake up and good
night timers. Press [TIMER FADER] when the power is
on. Press again to release.
news
While " " is displayed, timer faders work for all timers. (The recorded signal is not affected when
FADER
the recording timer is on.) The timer fader works every time unless the " " display is turned off.
FADER
Press while listening to the source
to select the playing time (minutes)
Each time you press (unit: minute)
SLEEP 30ÿ SLEEP 60ÿ SLEEP 90
SLEEP OFFÿ SLEEP 120
ÿ
Good night timer Lights
up during operation
SLEEP 30
Thai m
us
How to use
SLEEP
• •
pose
pose
?
?
•
Thailand
pose
?
Fe
Reader func
39
RQT6010
Advertisement
