Leica C-Lux 1 Instructions Manual page 99

• In [HIGH SENS.] (P54) in scene mode,
the resolution of the recorded picture
decreases slightly because of high
sensitivity processing.
This is not a malfunction.
7: Motion picture recording stops in the
middle.
• Are you using a MultiMediaCard?
– This unit does not support this mode
with MultiMediaCards.
• When you set the picture quality to
[30fpsVGA] or [30fps16:9], we
recommend using a high speed SD
Memory Card with "10MB/s" or greater
displayed on the package.
• Depending on the type of SD Memory
Card, recording may stop in the middle.
LCD monitor
1: The LCD monitor sometimes turns off
although the camera is turned on.
• Have you set economy mode? (P20)
– In economy mode, the LCD monitor
turns off while the flash is charged.
2: The LCD monitor becomes darker or
brighter for a moment.
• This phenomenon appears when you
press the shutter button halfway to set
the aperture value and does not affect
the recorded pictures.
3: The LCD monitor flickers indoors.
• The LCD monitor may flicker for a few
seconds after turning the camera on
indoors under fluorescent light.
This is not a malfunction.
4: The LCD monitor is too bright or dark.
• Adjust the brightness of the screen.
(P20)
• Is the power LCD function or high angle
mode activated?
5: Black, red, blue and green dots
appear on the LCD monitor.
• These pixels do not affect the recorded
pictures.
This is not a malfunction.
6: Noise appears on the LCD monitor.
• In dark places, noise may appear to
maintain the brightness of the LCD
monitor.
This does not affect the pictures you are
recording.
7: A vertical line appears on the LCD
monitor.
• This is a phenomenon called smear. It
is a characteristic of CCD and appears
when the subject has a bright part.
Uneven colors may also appear around
the smear. This is not a malfunction. It
is recorded in motion pictures but is not
recorded on still pictures.
Flash
1: The flash is not activated.
• Is the flash setting set to Forced OFF
[ ]?
– Change the flash setting. (P38)
• The flash is not activated when motion
picture mode [
[NIGHT SCENERY] (P50),
[FIREWORKS] (P52) or [STARRY SKY]
(P53) in scene mode is selected.
2: The flash is activated 2 times.
• When you select red-eye reduction (P38),
the flash is activated once before the
actual recording to reduce the red-eye
phenomenon (eyes of the subject
appearing red in the picture) and then
activated again for the actual recording.
Others
], [SCENERY] (P49),
99