Leica C-Lux 1 Instructions Manual page 87

Turn on the camera and the
printer.
Connect the camera to a printer
via the USB connection cable
(supplied).
• Connect the USB connection cable with
the [ ] mark facing the [ ] mark on
the [DIGITAL] socket.
• Hold the USB connection cable at
and insert straight in or take straight
out.
Press to select [PictBridge
(PTP)] and then press [MENU/
SET].
USB MODE
PLEASE SELECT
THE USB MODE.
PC
PictBridge(PTP)
SELECT
• If you set [USB MODE] in the [SETUP]
menu to [PictBridge (PTP)] in advance,
it is not necessary to set this every time
you connect to a PC. (P22)
• Do not use any other USB connection
cables except the supplied one.
• To find out more about PictBridge
compliant printers, contact your local
dealer.
MENU
/SET
SET
Connecting to other equipment
Single picture
Press to select
[SINGLE PICTURE] and then
press [MENU/SET].
PictBridge
SINGLE PICTURE
DPOF PICTURE
SELECT
/
Press to select the picture
and then press
PictBridge
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
PRINT
• The message disappears in about
2 seconds.
Press to select [PRINT START]
and then press [MENU/SET].
SINGLE PICTURE
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL SELECT
• Press [MENU/SET] to cancel printing.
Disconnect the USB connection
cable after printing.
MENU
/SET
SET
.
100 _ 0001
1/3
EXIT
１秒
1 OFF
MENU
/SET
SET
87