Installation Preparation; Removing The Freezer Door - Baumatic TITAN1 Instruction Manual

Installation preparation

o Check that the appliance will easily pass through all doorways en
o Appliance dimensions: 1790 mm(h) x 900 mm(w) x 730 mm(d).
o If your appliance will not fit through a doorway, then it is

Removing the freezer door

If the front bottom cover has already been attached, then it should be
removed before attempting to remove the door.
1)
2)
Get user manuals: See SafeManuals.com
IMPORTANT: A minimum of two people should
complete all of the installation steps given in this
manual.
route to its final position.
(including door handles).
possible to remove the fridge and freezer doors.
Unscrew the top hinge cover using a screwdriver. Insert a thin
screwdriver into the side groove of the cover to remove it.
Turn the top hinge fastener anti-clockwise 3-4 times and then
disconnect the harness wires.
23