Ozito SNGK-036 Instruction Manual
Ozito SNGK-036 Instruction Manual

Ozito SNGK-036 Instruction Manual

Cordless staple nail gun 3.6v li-ion

Advertisement

Quick Links

CORDLESS
STAPLE NAIL
GUN
3.6V LI-ION
INSTRUCTION MANUAL

SPECIFICATIONS

Input:
3.6V
Battery:
1.5Ah Li-Ion
Charging Time:
3 hours
Firing Rate:
30/min
Staple Size:
4-8mm T50 or JT21
Nail Size:
10mm C1 Brad
Magazine Capacity: 100 x JT21 Staples
or 60 x T50 Staples
or 100 x 10mm Nails
Weight:
0.94kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
3.6V
STAPLE NAIL GUN

WARRANTY

The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of 36 months from the original date of purchase. If
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
STANDARD EQUIPMENT
3.6V
STAPLE NAIL GUN
Cordless Staple Nail Gun
Charge Adaptor & USB Type C Cable
1000 x 8mm T50 Staples, 1000 x
8mm JT21 Staples & 500 x 10mm
C1 Brad Nails
SNGK-036
0221

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SNGK-036 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito SNGK-036

  • Page 1 8mm JT21 Staples & 500 x 10mm Weight: 0.94kg C1 Brad Nails ozito.com.au SNGK-036 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS STAPLE NAIL GUN 1. BATTERY 1. Magazine Window 6. Fastener Selector 2. Trigger 7. Safety Striker Guard 3. Sure Grip Handle 8. On/Off Switch WARNING! THE POWER SUPPLY FOR THIS CHARGER 4. Magazine Latch 9.
  • Page 3 2. FASTENER SELECTION 3. LOADING THE MAGAZINE Staples WARNING! ENSURE THE TOOL IS SWITCHED OFF BEFORE PERFORMING ANY OF THE FOLLOWING Accessories to suit this staple gun can be purchased from OPERATIONS. Bunnings Warehouse. Loading Fasteners This tool accepts staples with the measurements below: This tool only accepts T50 or JT21 staples or C1 Brad nails with the dimensions specified in this manual.
  • Page 4 3.6V STAPLE NAIL GUN 2. To fire the staple nail gun, squeeze the trigger with your other hand. 3.6V STAPLE NAIL GUN SNGK-036...
  • Page 5 Use of a cloth only is recommended. Never immerse any part of the tool into liquid. CARING FOR THE ENVIRONMENT Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.
  • Page 6 The power supply for this product should be protected by a residual current device (rated at 30mA or less). A residual Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. current device reduces the risk of electric shock.

This manual is also suitable for:

0401088

Table of Contents