Poly Edge E Series Quick Start Manual

Quick Start Guide
Poly Edge E Series
Home Screen
Displays menu options for settings and device
information for all Poly Edge E Series Phones.
Place a Call
You can only have one active call in progress
at a time on your phone.
» Do one of the following:
Pick up the handset, enter the phone
●
number, and press Send.
Press or , enter the phone
●
number, and press Send.
Enter the phone number, press Dial,
●
and pick up the handset.
Enter the phone number and press
●
or .
Press the line key, enter the phone
●
number, and select Send.
Select New Call, enter the phone
●
number, and press Send.
Examples provide typical steps for usage of the standard configuration setup. Contact customer service for assistance with customized configurations.
888.538.3960 | www.momentumtelecom.com/support
Answer a Call
You can answer a call using the handset,
speakerphone, or a headset.
To answer a call:
» Do one of the following:
To answer with the speakerphone,

press or press the Answer softkey.
To answer with the handset, pick up

the handset.
To answer with a headset, press

Hold and Resume a Call
You can have multiple calls on hold and resume a
call at any time.
To hold a call:
» Highlight the call and press the Hold softkey
or press .
To resume a call:
» Highlight the call and press the Resume
softkey or press .
End a Call
You can only end active calls. To end a held call,
you must resume the call first.
To end an active all:
» Replace the handset in the cradle, press
or , or press the End Call softkey.
To end a held call:
1 Highlight the held call and press Resume.
.
2 Press End Call.
Transfer a Call
You can transfer calls to any contact.
To transfer a call:
1 Press and hold the Transfer softkey or
press .
3 Choose Blind or Consultative.
4 Dial a number or choose a contact.
If you chose Blind, the call is transferred
immediately.
5 If you chose Consultative, press the
Transfer softkey or press
speaking with your contact.
after
1