Commissioning/Start-Up; Maintenance And Cleaning - Oase BioStyle 30 Operating Instructions Manual

Commissioning/start-up

CAUTION
Risk of burns from hot surface.
Turn the heater off and let it cool down before removing it from the water.
NOTE
Fire hazard due to highly flammable material on hot surface.
Turn the heater off and let it cool down before removing it from the water.
Do not leave the heater unattended after removing it from the water.
Switching on: Plug the power plug into the outlet.
– The unit switches on immediately.
– Lay the power supply cord so that a drip loop is formed and the lowest point is
below the socket. This prevents dripping water from entering the socket.
Switching off: Pull the power plug from the outlet.

Maintenance and cleaning

NOTE
Do not use aggressive cleaning agents or chemical solutions. These agents can dam-
age the housing, impair the function of the device and harm animals, plants and the
environment.
Only clean the unit with clear water and a soft brush.
Clean the unit as required, but at least twice a year.
8
BSE0011