(7) Torque each B-3808-5 self-locking hex nut with a torque
wrench and a torque adapter (that fits a hex nut that is
1/2 inch across the flats) in accordance with Table 3-1
and Figure 3-1.
(8) Attach the RPM control cable to the control arm of the
governor.
(9) Attach the pilot control cable (manual reverse thrust
operation and maneuvering) to the pressure control unit
control lever.
INSTALLATION AND REMOVAL
Propeller Owner's Manual
136
61-00-36
Page 3-42
Rev. 2 Feb/17