Subscribe to Our Youtube Channel
Related Manuals for ShotTrack ViB 200
Summary of Contents for ShotTrack ViB 200
- Page 1 ShotTrack Vibration Monitors ShotTrack ViB User Guide ShotTrack Pty Ltd Innovation Hub Coffs Harbour NSW 2450 Australia...
-
Page 2: Table Of Contents
Go to help menu ..............................7 Start unit in bootload mode ..........................7 Uploading new Firmware ............................8 Select Com Port ............................... 8 Get new firmware file ............................9 Program unit ................................9 ShotTrack Pty Ltd Innovation Hub Coffs Harbour NSW 2450 Australia... -
Page 3: Set-Up Unit
ShotTrack Vibration Monitors ShotTrack ViB HG Set-Up unit Switch the ShotTrack ViB Unit on that you want to setup Double click on the ShotTrack ViB Monitor icon The main window opens with no data displayed. Device From the main task bar click on Device... -
Page 4: Device Settings
Date/Time stamping These settings are retained by the unit when switched off and to deploy the units with these pre-set settings is simply a matter of switching the unit on. ShotTrack Pty Ltd Innovation Hub Coffs Harbour NSW 2450 Australia... -
Page 5: On The Bench
The unit can have its operating parameters changed at any point using the Bluetooth connection Switch off the unit Press on/off button until it is illuminated with a solid Blue colour. ShotTrack Pty Ltd Innovation Hub Coffs Harbour NSW 2450 Australia... -
Page 6: Firmware Update For Vib Hg
Warning: Download any files on the unit as these will be deleted during the update operation • Switch on the ShotTrack ViB unit you wish to update Open Program • Double click on the ShotTrack ViB Monitor icon •... -
Page 7: Go To Help Menu
• Choose unit to be updated • Unit has been reset. It will automatically switch off at this point Start unit in bootload mode Press and hold ON/OFF button ShotTrack Pty Ltd Innovation Hub Coffs Harbour NSW 2450 Australia... -
Page 8: Uploading New Firmware
Click on connect If connection can be made the status box shows Device connected and the Bootloader Firmware Version number Keep button pressed Button will change from flashing to BLUE flashing ShotTrack Pty Ltd Innovation Hub Coffs Harbour NSW 2450 Australia... -
Page 9: Get New Firmware File
Release button now The button will flash quickly as any files on the unit are deleted 16 flashes per file. When finished the button will turn BLUE • Exit PIC32 Bootloader Application ShotTrack Pty Ltd Innovation Hub Coffs Harbour NSW 2450 Australia...
Need help?
Do you have a question about the ViB 200 and is the answer not in the manual?
Questions and answers