Huawei K562e Quick Start Manual page 5

K562e
Quick Start-02
Indicator
WLAN
Ports and Buttons
No.
1
2
3
4
Issue 02 (2021-06-25)
State
Off
Steady blue
Blinking blue
Off
K562e Description
Network The port is auto-negotiated to a LAN port when connected
ports to a computer or STB, and to a WAN port when connected
to the LAN port of an Internet gateway.
Reset When the K562e is starting, use a needle-shaped object to
button press and hold this button for more than 2 seconds until all
indicators turn off. After the device restarts and the Power
indicator turns on, the factory settings are restored.
NOTE
Exercise caution when pressing the button. If you cannot access the
Internet after the device is restored to factory settings, contact your
service provider for help.
Power Connects to the power adapter.
WPS Enables the WPS pairing function.
Copyright © Huawei Technologies Co., Ltd.
Description
None of the four GE ports are connected with a
network cable.
Wi-Fi is enabled.
WPS pairing is in progress.
Wi-Fi is disabled (enabled by default).
1 Product Overview
2