Related Manuals for Comet S0842
Summary of Contents for Comet S0842
- Page 1 LOGGER S0842 Three channel temperature logger with one binary input and LCD display Instruction Manual...
- Page 2 Instruction Manual for use of S0842 logger Instrument is designed for measurement and record of temperature from three external temperature probes and one binary signal from external contact. Temperature probes and binary signal are connected by means of connectors. Measured value of temperature and actual state of binary input are displayed on dual line LCD display and are stored in adjusted time interval to internal non-volatile memory.
- Page 3 Limit condition: temperature -40 to +70 °C, humidity 0 to 100 %RH Storing condition: temperature -40 to +85 °C, humidity 0 to 100 %RH Dimensions: 93 x 64 x 29 mm Weight including battery: approximately 130 g Material of the case: ABS IE-LOG-S0842-01...
- Page 4 (not relevant to binary inputs) optionally enable permanent alarm indication (alarm with memory) switch ON or switch OFF the display of logger IE-LOG-S0842-01...
- Page 5 Other measured or calculated values are displayed always after 5 seconds. Instrument now displays channel 3 temperature (°C) and binary input actual state. Symbol On indicates closed contact (respectively low voltage level), symbol OFF indicates opened or not connected contact. IE-LOG-S0842-01...
- Page 6 If value of measured quantity gets outside of set limits, alarm of proper quantity is active and it is indicated on the display. It is possible to select "memory alarm mode" when alarm is indicated permanently up to reset from the PC. IE-LOG-S0842-01...
- Page 7 ON the logger from the computer. Notice: It is not possible to combine function switching OFF by magnet and MIN/MAX memory clear by magnet! User software enables only one of them to select. IE-LOG-S0842-01...
- Page 8 -5°C or over +35°C and PC program indicates remaining battery capacity below 25% it is also recommended to replace the battery. Applied is Lithium battery 3.6 V, size AA. Battery is located under logger lid. IE-LOG-S0842-01...
- Page 9 EN 55011 Class B immunity: EN 61000-4-2 (levels 4/8 kV, Class A) EN 61000-4-3 (intensity of electric field 3 V/m, Class A) EN 61000-4-4 (levels 1/0.5 kV, Class A) EN 61000-4-6 (intensity of electric field 3 V/m, Class A) IE-LOG-S0842-01...
Need help?
Do you have a question about the S0842 and is the answer not in the manual?
Questions and answers