Advertisement
Digital Inputs
This enables the user to change the parameters and run the motor via its
Digital inputs (i.e. K4 Motor Controller) while monitoring and if required
recording the actual motor values i.e. out of the box mode.
Parameters
This enables the user to begin changing the motor parameters to customise
the operation and functionality.
Read
Read the existing motor settings
Write Write any updated settings to the motor's temporary memory (these
settings will be lost if power is removed from the motor)
Save
Save settings to the motor memory (these settings will remain if the
power is removed from the motor)
To read, write or save all digital inputs to the motor must be set to low (0)
7
Advertisement
