Table of Contents
Advertisement
AT
OMIC CLOCK WITH OUTDOOR WIRELESS TEMPERA
AND WEATHER FORECAST
Instruction Manual
FEATURES:
ATOMIC CLOCK:
LCD1
display
LCD2
display
•
WWVB Radio controlled time with manual time setting
•
12/24 hour time display
•
Time display: hour, minute, second
•
Alarm setting with snooze function
•
Calendar display
•
Weekday display (4 languages to choose from: English, French, Spanish and German)
•
Time zone setting
•
Daylight savings time ON/OFF option (DST)
•
ºC or ºF temperature display selectable
•
Indoor temperature display
•
Outdoor temperature display via 433MHz transmission
•
Wall mount or freestanding
•
Weather forecast for next 12 to 20 hours based on changing air pressure
WS-8157
TURE
Hanging holes
Function keys
Battery cover
Foldable stand
OUTDOOR TEMPERATURE TRANSMITTER:
• Remote transmission of outdoor temperature to the atomic clock by 433 MHz signals
• Wall mounting case
TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK
The atomic clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow the
steps below:
1.
Insert finger or other solid object in the space at the bottom center of the battery compartment
and lift up to remove the cover.
2.
Insert batteries observing the correct polarity (see marking inside battery compartment).
3.
Replace compartment cover.
DO NOT SET THE CLOCK.
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the
steps below:
1.
Remove the cover.
2.
Insert the batteries, observing the correct polarity (see marking inside battery compartment).
3.
Replace the battery cover on the unit.
Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries.
Holder
Advertisement
Table of Contents
Related Manuals for La Crosse Technology WS-8157U-A
Summary of Contents for La Crosse Technology WS-8157U-A
- Page 1 WS-8157 OMIC CLOCK WITH OUTDOOR WIRELESS TEMPERA AND WEATHER FORECAST Instruction Manual FEATURES: ATOMIC CLOCK: LCD1 display LCD2 display • WWVB Radio controlled time with manual time setting • 12/24 hour time display • Time display: hour, minute, second • Alarm setting with snooze function •...
-
Page 2: Function Keys
SETTING UP: Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries. batteries. NOTE: Do not set the clock until the outdoor temperature is displayed. NOTE: Do not set the clock until the outdoor temperature is displayed. Place batteries in the outdoor transmitter first, then into the atomic clock. -
Page 3: Manual Settings
Weather Icons There are 3 possible weather icons that will be displayed in the LCD 2: Sunny—indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds—indicates that the weather is expected to be fair (not that the weather will be sunny with clouds). -
Page 4: Language Setting
• -8 PST (Pacific time), • -9 ALA (Alaska time), • -10 HAW (Hawaii time). • "GMT” will be displayed if set to GMT (0). Press and release the SET key to enter the “DST Setting“. DST SETTING (daylight saving time) The ON digit will start flashing on LCD1. -
Page 5: Alarm Setting
°C OR °F TEMPERATURE SETTING The characters “°C” or “°F” will start flashing on LCD1 (Default setting °F). By use of the + key select “°C” for temperature display in degrees Celsius or “°F” for degrees Fahrenheit. Press and release the SET key to exit the setting mode and switch back to the normal display mode. -
Page 6: Wwvb Radio Controlled Time
Press the + key. The display should now show the month&date/weekday/seconds/outdoor temperature. Press the + key a second time and the display will now show the month&date/weekday/indoor temperature/seconds. Press the + key third time and the display will now show the month&date/seconds/indoor temperature/outdoor temperature Press the + key a fourth time and the display will return to the normal display. -
Page 7: Wall Mounting
WALL MOUNTING 1) Using a straightedge, horizontally space at 2-3/4 of an inch (70 mm) three screw positions on a wall. 2) Install three mounting screws (not included) into a wall within transmission range—leaving approximately 3/16 of an inch (5mm) extended from the wall. 3) Place the atomic clock onto the screws, using the hanging holes on the backside. -
Page 8: Care And Maintenance
CARE AND MAINTENANCE: • Avoid placing the units in areas prone to vibration and shock as these may cause damage. • Avoid areas where the units can be exposed to sudden changes in temperature, i.e. direct sunlight, extreme cold and wet/moist conditions as these will lead to rapid changes which reduces the accuracy of readings. -
Page 9: Warranty Information
WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this atomic clock. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the atomic clock in for repairs, contact La Crosse Technology. The atomic clock will be repaired or replaced with the same or similar model. - Page 10 WS-8157 ATOMIC CLOCK WITH OUTDOOR TEMPERATURE AND WEATHER FORECAST Instruction Manual...