La Crosse Technology WS-8115U Quick Start Manual

ATOMIC DIGITAL WALL CLOCK
with Indoor/Outdoor Temp
QUICK START GUIDE
Model: WS-8115U
DC:050818
Full Manual can be found under the Support Tab here: http://bit.ly/WS-8115U

ATOMIC DIGITAL WALL CLOCK OVERVIEW

WWVB
Atomic Time
Indicator
Time Display
Indoor
Temperature
Display
(°F/°C)
Calendar
Display
SET ALARM PLUS

SNOOZE

Buttons
Note: The
unmarked Reset
circles are
inactive
Mounting
Hole
SET ALARM PLUS SNOOZE
Reset
Pull Out Legs
Page | 2

POWER UP

1. Insert 2-AAA batteries into the outdoor sensor.
2. Insert 2-AA batteries into the clock.
3. Configure basic settings.
4. Once the sensor is reading to your clock, place it outside
Alarm
Indicator
in a shaded location.
Watch sensor mounting video: http://bit.ly/TH_SensorMounting
Outdoor
Temperature
Display

SETTINGS

(°F/°C)
• Hold the SET button to enter the Settings Menu.
• Press the PLUS button to adjust values.
• Press the SET button to confirm and move to the next item
or exit.
Settings Menu Order:
1. Time Zone
2. Daylight Saving Time ON/OFF
3. Language
Languages:
4. Hour
US English
5. Minutes
F
French
6. Year (2 digit) E
Spanish
d
German
7. Month
8. Date
9. Weekday
Battery
10. 12/24 Hour Format
Compartment
11. Fahrenheit/Celsius
Page | 3

WWVB ATOMIC TIME SIGNAL

• The WWVB Atomic Time Indicator will flash when searching for
the signal.
• Depending on your location reception may take up to 5 nights.
• When WWVB signal is received, the indicator will be solid.
• For information about WWVB Atomic time visit:
http://bit.ly/AtomicTime

ALARM SETTING

• Hold the ALARM button to enter Alarm Settings.
• Press the PLUS button to adjust values.
• Press the ALARM button to confirm and move to the next item
or exit.

ACTIVATE | DEACTIVATE ALARM

This clock can be set to
• Press the ALARM button to activate or deactivate the alarm. •
time zone +/- 12 or
anywhere in between. • The Alarm Indicator will display when active.
Note: The alarm will automatically be activated after setting a new
North American time zones:
alarm time.
-4h ATL - Atlantic
-5h EST - Eastern (default)
-6h CST - Central
SNOOZE
-7h MST - Mountain
• When the alarm sounds, press the SNOOZE button to silence
-8h PST - Pacific
-9h ALA – Alaska
the alarm for 10 minutes. The Alarm Indicator will flash.
-10h
-Hawaiian
• This is a crescendo alarm that will sound for 120 seconds if not
deactivated.
Page | 4