Advertisement
Quick Links
Model: WS-8117U-IT
Instruction Manual
DC: 041916
ATOMIC DIGITAL CLOCK
WITH MOON PHASE
Time, Alarm, +
WWVB Icon
Indoor Temp.,
Weekday, Date,
Moon Phase, +
Outdoor Temp.
Two AA
Batteries
Foldout Stand
Buttons
+
SET
ALM
SNZ
WS-8117U-IT
www.lacrossetechnology.com/support
Page | 1
Advertisement
Related Manuals for La Crosse Technology WS-8117U-IT-OAK
Summary of Contents for La Crosse Technology WS-8117U-IT-OAK
- Page 1 Model: WS-8117U-IT Instruction Manual DC: 041916 ATOMIC DIGITAL CLOCK WITH MOON PHASE Time, Alarm, + WWVB Icon Indoor Temp., Weekday, Date, Moon Phase, + Outdoor Temp. Two AA Batteries Foldout Stand Buttons WS-8117U-IT www.lacrossetechnology.com/support Page | 1...
- Page 2 Get Started 1: Insert 2 fresh AA, batteries into the TX37U-IT sensor. Observe correct polarity. 2: Insert 2 fresh AA, batteries into the atomic clock Observe correct polarity. 3: Set time, time zone, etc. 4: After 5 minutes place sensor outside in a shaded location. Restart: If the outdoor temperature shows dashes, remove batteries from the station &...
- Page 3 Deactivate/Activate ALM • Press ALM once to deactivate the alarm. • The alarm icon will disappear. • Press ALM once to activate the alarm. • The alarm icon will appear. Snooze • Press SNZ to silence an active alarm for 10 minutes. •...
- Page 4 Moon Phase The LCD Moon phase is divided by 6 sections, showing a total of 12 phases of the moon. Note: With the moon shown against a light colored background, the phases will show opposite to a paper calendar. The segments that are highlighted will portray the part of the moon that is lit.
- Page 5 TX37U-IT Sensor (128.3 x 38.2 x 21.2 mm) Warranty and Support Information La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. View full warranty details online at: www.lacrossetechnology.com/warranty_info.pdf...
- Page 6 Protected under U.S. Patents: 5,978,738 | 6,076,044 | RE43903 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.