Connecting Your Monitor - Dell G2723H User Manual

Connecting your monitor

WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
NOTE: Dell monitors are designed to work optimally with the Dell-supplied
cables inside the box. Dell does not guarantee the video quality and
performance if non-Dell cables are used.
NOTE: Route the cables through the cable-management slot before
connecting them.
NOTE: Do not connect all the cables to the computer at the same time.
NOTE:The images are for the purpose of illustration only. The appearance
of the computer may vary.
To connect your monitor to the computer:
1. Turn off your computer.
2. Connect the DisplayPort/HDMI/USB cable from your monitor to the computer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
NOTE: The default setting for G2723H is DisplayPort 1.4. A graphic card
with DisplayPort 1.1 may not display normally. See
problems – No image when using DP connection to the PC
default setting.
product specific
Setting up the monitor
to change
| 33