Table of Contents
Advertisement
Pressure high alarm and low alarm setting
1) Press the ALARM key to enter the normal time alarm
2) Continue to press the ALARM key until you reach the pressure high alarm
set mode
3) Press and hold the SET key to enter the pressure setting values (digits will
start flashing) and set the desired pressure high by using the PLUS (+) or
MINUS (-) keys
4) Press ALARM key to confirm and press the MIN/MAX key to return to the
normal display mode or press the ALARM key once more to toggle to the
pressure low alarm set mode.
5) Press and hold the SET key to enter the pressure low setting values (digits
will start flashing) and set the desired pressure low by using the PLUS (+)
or MINUS (-) keys
6) Press ALARM key to confirm and press the MIN/MAX key to return to the
normal display mode or press the ALARM once more to toggle to another
alarm setting mode.
Wind speed high alarm and low alarm setting
1) Press the ALARM key to enter the normal time alarm
2) Continue to press the ALARM key until you reach the wind speed high
alarm set mode
3) Press and hold the SET key to enter the wind speed setting values (digits
will start flashing) and set the desired wind speed high by using the PLUS
(+) or MINUS (-) keys
4) Press ALARM key to confirm and press the MIN/MAX key to return to the
normal display mode or press the ALARM key once more to toggle to the
wind speed low alarm set mode.
5) Press and hold the SET key to enter the wind speed low setting values
(digits will start flashing) and set the desired pressure low by using the
PLUS (+) or MINUS (-) keys
6) Press ALARM key to confirm and press the MIN/MAX key to return the
normal display mode or press the ALARM once more to toggle to another
alarm setting mode.
Wind direction alarm setting
1) Press the ALARM key to enter the normal time alarm
2) Continue to press the ALARM key until you reach the wind direction alarm
set mode
3) Press and hold the SET key to enter the wind direction setting values.
4) Using the PLUS (+) or MINUS (-) keys select the desired wind direction
and use the SET key to confirm or cancel each direction input
5) Press ALARM key to confirm and press the MIN/MAX key to return the
normal display mode or press the ALARM once more to toggle to another
alarm setting mode.
Storm warning alarm setting
Unlike the other weather alarms, the storm warning alarm is set by entering
the main manual setting mode as follows:
1) Press the SET key to enter the manual setting mode
2) Continue to press the SET key until the Storm warning icon flashes
(tendency arrow flashing downwards with the pressure values flashing)
3) Set the desired inHg pressure value (9, 12, 15, 18, 21, 24, 27 inHg) using
the PLUS (+) or MINUS (-) keys
4) Press the MIN/MAX key to confirm and return to the normal display.
Storm warning alarm ON/OFF
After storm warning alarm setting, the next mode to appear after pressing the
SET key is the storm warning ON/OFF. Use the PLUS (+) or MINUS (-) key to
change the status to AON or AOFF. Default setting is ON:
Should the air pressure drop equal or below the pre-set inHg value within the
last 6 hour period, then the downward tendency arrow will flash as an
indication of possible storm. The base station will take hourly measurements
as a point of reference. The storm-warning indicator will stop flashing once the
air pressure becomes more stable.
Master Alarm – BUZZER OFF
The time and all the weather alarms may have buzzer sound set to OFF by
holding the MINUS (-) key down for about 3 seconds in normal display mode
and the BUZZER OFF icon appears on the bottom left of the LCD. When the
BUZZER OFF is displayed, the time and all other weather alarms when
activated will only flash but not sound regardless if that particular alarm has
been set to the ON. To deactivate the BUZZER OFF, press the MINUS (-) key
once more.
General Alarm Icon
The general alarm icon on the bottom right corner of the LCD will appear when
any weather alarm is activated to show the user that a set weather condition
has been reached. The activated alarm can be determined by checking the set
alarm values against the MIN/MAX values reached. To deactivate the general
weather alarm icon, press the ALARM key.
Important
When entering the alarm set mode for a specific weather or temperature
condition, the corresponding alarm is automatically enabled (ON) when the
SET key is pressed, regardless of its previous setting and the alarm value will
flash to indicate that it has been activated. Press the ALARM key to confirm
the setting and continue pressing the ALARM key to toggle through each
alarm mode until it returns to the normal display mode or press the MIN/MAX
key at any time to exit the alarm setting modes.
Advertisement
Table of Contents
