1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Network Hardware
  5. iNA200 Series
  6. User manual

AXIOMTEK iNA200 Series User Manual

Din rail network appliance
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
iNA200 Series
Din Rail Network Appliance
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iNA200 Series and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK iNA200 Series

Summary of Contents for AXIOMTEK iNA200 Series

  • Page 1 Series Din Rail Network Appliance User’s Manual...
  • Page 2 Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.
  • Page 3 Safety Approvals CE Marking ◆ FCC Class A ◆ FCC Compliance ◆ This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 4 When handling boards and components, wear a wrist-grounding strap, available ⚫ from most electronic component stores. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. ® Windows is a trademark of Microsoft Corporation. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.

  • Page 5: Table Of Contents

    Table of Contents Section 1 Introduction ............1 1.1 General Description ....................1 1.2 Features ........................... 1 1.3 Specifications ........................ 2 1.4 Dimensions and Outlines ..................4 1.4.1 Din-Rail Bracket Dimensions ..............4 1.5 I/O Outlets ........................5 Section 2 Interfaces and Connectors ........
  • Page 6 4.6 Boot Type ........................47 4.7 Save & Exit ........................49 Appendix A Watchdog Timer ............. 51 About Watchdog Timer ....................51 How to Use Watchdog Timer ..................51...

  • Page 7: Introduction

    Features iNA200 series supports Intel® Elkhart Lake processor, has a compact size high compatibility, and low power for network security field application. Intel® Elkhart Lake Processor ⚫...

  • Page 8: Specifications

    iNA200 User’s Manual Specifications Model iNA200 SBCs NAB200 / MIO306 / EIO105 Form Factor Din Rail Chassis Material Steel Chipset SoC integrated Processor/Cache Intel® Atom® x6212RE/x6414RE 1.2GHz/1.5GHz 2C/4C 6W/9W BIOS AMI 128Mbits Flash ROM System Memory 1 x DDR4-3200MHz SO-DIMM (Non ECC) up to 32GB Super I/O Fintek F81804 Processor Graphic...
  • Page 9 iNA200 User’s Manual Linux kernel 5.15.0-41 ;Windows 10 Environmental Operating temperature: -40°C ~ 70°C Storage temperature: -40°C ~ 85°C 10% ~ 90% non-condensing NOTE: All specifications and images are subject to change without notice. Windows or Linux boot, please refer to the Section 4.6 Boot Type ★...

  • Page 10: Dimensions And Outlines

    User’s Manual Dimensions and Outlines The following diagram shows you dimensions and outlines of the iNA200 Series. 1.4.1 Din-Rail Bracket Dimensions Users can get 4pcs M3*6L screws for fixing the din-rail kit from the accessory box. Introduction...

  • Page 11: I/O Outlets

    User’s Manual I/O Outlets Locate front and rear panel I/O outlets on the iNA200 Series server to connect serial and Ethernet interface devices. RS-485 PORT 2 x USB 3.1 (COM3) 1 x COM (COM1) 2 x LAN SFP PORT...
  • Page 12 iNA200 User’s Manual Power LED ⚫ The LED will maintain a solid green color when the server is powered on to perform diagnostic tests and check for proper operation. HDD LED ⚫ The LED flashes when transmitting or receiving any signals. Programmable LED ⚫...
  • Page 13 iNA200 User’s Manual Active LED (Single color) for LAN port #3, port#4 ⚫ The orange LED is on when the LAN port connection is working. The LED flashes when transmitting or receiving any signals to or from the system. The LED is dark when the system is off. Link LED for LAN port #3, port#4 The double-color LED light indicates ⚫...
  • Page 14 iNA200 User’s Manual This page is intentionally left blank Introduction...

  • Page 15: Interfaces And Connectors

    1 x Thermal PAD FSL-BSNA For DDR bracket ⚫ If you cannot find this package or any items are missing, please contact Axiomtek distributors immediately. If you order any optional components, the package might contain those additional hardware or documents accordingly.

  • Page 16: Board Layout

    iNA200 User’s Manual Board Layout NAB200 TOP View DIMM1 BAT1 SATA1 PCIE1 COM2 COM1 Interfaces and Connectors...
  • Page 17 iNA200 User’s Manual NAB200 Bottom View Interfaces and Connectors...
  • Page 18 iNA200 User’s Manual MIO306 TOP View PCIE1 Interfaces and Connectors...

  • Page 19: Connectors

    iNA200 User’s Manual Connectors Signals go to other parts of the system through connectors. Loose or improper connection might cause problems, please make sure all connectors are properly and firmly connected. Here is a summary table which shows all connectors on the hardware. NAB200 Connectors Label...

  • Page 20: Serial Port1 (Com1)

    iNA200 User’s Manual 2.3.1 Serial Port1 (COM1) RS-232 RS-422 RS-485 DCD1 Data- Data+ DTR1 DSR1 RTS1 CTS1 2.3.2 Console Port (COM2) Signal Signal 2.3.3 Power Power Input ⚫ DC Terminal block : Wide-range 12 - 24V. OVP and Reverse protection. Signal Vin2 - Vin2...
  • Page 21 iNA200 User’s Manual Relay output ➢ Below is a very simple application for remote notice use relay and lamp. Normal Warning Interfaces and Connectors...

  • Page 22: Watchdog Timer (Wdt)

    iNA200 User’s Manual WatchDog Timer (WDT) 1~255 seconds or minutes; up to 255 levels ⚫ Restore BIOS Optimal Defaults (SW1) Press the tact switch (SW 1) can restore BIOS optimal defaults. ⚫ System LED The list shows the LED's indicators and functional descriptions. ⚫...

  • Page 23: Hardwarew Installation

    iNA200 User’s Manual Section 3 Hardwarew Installation The INA200 is convenient for your various hardware configurations, such as Memory Module and Hard Disk Drive. The Section 3 will show you how to install the hardware. It includes: Installing the Memory Module Step 1 Turn off the system.
  • Page 24 iNA200 User’s Manual Step 3 Remove the cover from the system. Hardware Installation...
  • Page 25 iNA200 User’s Manual Step 4 Put the thermal pad on memory module can enhance cooling effect. Step 5 Use two fingers to hold the memory module, and insert the gold figure into the slot and push the module down. Hardware Installation...
  • Page 26 iNA200 User’s Manual Step 6 The memory module is locked by two latches on the sides. But we still strongly recommend using “LDC737” silicone on the two sides of the memory for anti- vibration. Step 7 Stick thermal pad onto DDR (option) Hardware Installation...
  • Page 27 iNA200 User’s Manual Step 8 Install DDR bracket (option) Step 9 Put the screw of Bracket (option) Step 10 Put the cover back to the system, and tighten screws tight to close the chassis. Hardware Installation...

  • Page 28: Installing The Sata Hdd

    iNA200 User’s Manual Installing the SATA HDD Step 1 Turn off the system. Step 2 Loosen all screws of the cover and remove the cover from the system. Please refer to Section 3.1 Step 3 Take out the SATA+Power HDD cable & 4pcs of screws for fixing the Hard Disk Drive from the accessory bag.
  • Page 29 iNA200 User’s Manual Step 5 Insert the Hard Disk Drive into the bracket and use these screws to fix it tightly. NOTE: The front of Hard Disk Drive must be upward when insert the Hard Disk Drive into the bracket. Step 6 Connecting the SATA+Power HDD cable with Hard Disk Drive.

  • Page 30: Installing Mini-Card Module

    iNA200 User’s Manual Step 7 Put the cover back to the system, and tighten screws to close the chassis. Installing Mini-Card Module Step 1 Turn off the system. Step 2 Loosen all screws of the cover and remove the cover from the system. Please refer to Section 3.1 Step 3 Loosen screws of the HDD Bracket...
  • Page 31 iNA200 User’s Manual Step 4 Following the steps from Figure 3-1; push the SIM slot backward to unlock SIM slot. Insert the SIM card and put it back (Figure 3-2), and lock the SIM slot (Figure 3-3). Figure 3-1 Figure 3-2 Figure 3-3 Step 5 Insert the wireless/mSATA module into the Mini-Card slot.
  • Page 32 iNA200 User’s Manual Step 6 Insert the 3G module and tighten the screws. Step 7 Remove the plug cover from the chassis. Hardware Installation...
  • Page 33 iNA200 User’s Manual Step 8 Connect the RF cable to the connector of WiFi module Step 9 Loosen screws of the HDD Bracket Hardware Installation...
  • Page 34 iNA200 User’s Manual Step 10 Take out the parts from the 3G/4G kit package (Figure 3-4) and put the RF cable through the antenna hole (Figure 3-5). Finally, tighten the screws. (Figure 3-6). Figure 3-4 Figure 3-5 Figure 3-6 Step 11 Screw the RF antenna tight.
  • Page 35 iNA200 User’s Manual Step 12 Put the cover back to the system, and tighten the screws and close the chassis. NOTE: Only the Nano SIM card as the following picture can be inserted into the slot . Hardware Installation...

  • Page 36: Installing Din-Rail Mounting

    iNA200 User’s Manual Installing Din-rail Mounting The iNA200 provides Din-rail Mount as below: Step 1 Prepare Din-rail Mount assembling components (screws and bracket) ready. Step 2 Assemble the bracket to the system and tighten the screws . Hardware and Installation...

  • Page 37: Ami Bios Setup Utility

    iNA200 User’s Manual Section 4 AMI BIOS Setup Utility The AMI UEFI BIOS provides users with a built-in Setup program to modify basic system configuration. All configured parameters are stored in a flash backup to save the Setup information whenever the power is turned off Entering Setup To enter the setup screens and follow the steps below: Turn on the computer and press the <Del>...

  • Page 38: Advanced Features

    iNA200 User’s Manual Advanced Features This Advanced menu allows users to configure and improve your system, or to set up some system features according to your preference. You can select any of the items in the left frame of the screen to go to the sub menus: ►...
  • Page 39 iNA200 User’s Manual CPU Configuration ⚫ Scroll to this item and press <Enter> to view the CPU Configuration information. (Please refer to the graphics below .) AMI BIOS Setup Utility...
  • Page 40 iNA200 User’s Manual USB Configuration ⚫ Scroll to this item and press <Enter> to view the USB Configuration information. (Please refer to the graphics below) AMI BIOS Setup Utility...
  • Page 41 iNA200 User’s Manual Storage Configuration ⚫ Scroll to this item and press <Enter> to view the eMMC and SATA Configuration information. (Please refer to the graphics below .) AMI BIOS Setup Utility...
  • Page 42 iNA200 User’s Manual AMI BIOS Setup Utility...
  • Page 43 iNA200 User’s Manual H/W Monitor ⚫ Scroll to this item and press <Enter> to view the hardware status items under monitoring. (Please refer to the graphics below .) AMI BIOS Setup Utility...
  • Page 44 iNA200 User’s Manual F81804 Super IO Configuration ⚫ The default setting for all serial ports is RS-232. You can change the setting by selecting the value you want in each COM port type. The system supports RS-422 and RS-485 modes as well as high-speed mode. You can enable High-speed mode, which can be selected in the BIOS menu.
  • Page 45 iNA200 User’s Manual AMI BIOS Setup Utility...
  • Page 46 iNA200 User’s Manual Trust Computing ⚫ This sub-menu will allow users to enable/disable Trusted Platform Module (TPM) and to configure the TPM State. Select Trusted Computing and press <Enter> to access the sub-menu. Select the Security Device Support item to enable the TPM device. AMI BIOS Setup Utility...
  • Page 47 iNA200 User’s Manual Serial Port Configuration ⚫ The DIO Modification default setting is “disable”. If the setting is changed to “enable”, you can load manufacture default and program DIO setting. (Please refer to the graphics below .) AMI BIOS Setup Utility...
  • Page 48 iNA200 User’s Manual LAN Bypass Configuration ⚫ Enable/Disable LAN bypass function AMI BIOS Setup Utility...

  • Page 49: Chipset Feature

    iNA200 User’s Manual Chipset Feature This section contains fully optimized chipset features in the system. AMI BIOS Setup Utility...
  • Page 50 iNA200 User’s Manual AMI BIOS Setup Utility...

  • Page 51: Security

    iNA200 User’s Manual Security The Security menu allows users to enhance system security by setting an administrator password and a user password. No password has been set in the default setting. (Please refer to the graphics below .) AMI BIOS Setup Utility...
  • Page 52 iNA200 User’s Manual NOTE: The BIOS default has no password. The user must remember the password after creating one. If the user forgets the password RMA is the only solution. AMI BIOS Setup Utility...

  • Page 53: Boot Type

    iNA200 User’s Manual Boot Type The Boot menu allows users to change boot options of the system AMI BIOS Setup Utility...
  • Page 54 iNA200 User’s Manual PinCtrl Driver GPIO Scheme item for choosing for linux or windows The Boot Option Priorities can be set by selecting Boot Option #1, #2… (Please refer to the graphics below .) AMI BIOS Setup Utility...

  • Page 55: Save & Exit

    iNA200 User’s Manual Save & Exit The Save & Exit menu allows users to determine whether or not to accept their modifications to the system configuration, or to keep default values for optimal fail-safe performance. (Please refer to the graphics below .) BIOS menu item Description Save Changes and Exit...
  • Page 56 iNA200 User’s Manual Discard Changes Select this option to quit Setup without making any permanent changes to the system configuration. Select Discard Changes from the Save & Exit menu and press <Enter>. Select Yes to discard changes. Restore Defaults It automatically sets all Setup options to a complete set of default settings when users select this option.

  • Page 57: Appendix A Watchdog Timer

    iNA200 User’s Manual Appendix A Watchdog Timer About Watchdog Timer After the system stops working for a while, it can be auto-reset by the watchdog timer. The integrated watchdog timer can be set up in the system reset mode by program. How to Use Watchdog Timer The following example enables configuration using debug tool.
  • Page 58 iNA200 User’s Manual Set Second or Minute : O 2E F5 O 2F N=71h or 79h N=71h, the time base is set to second. N=79h, the time base is set to minute. Watchdog Timer...

This manual is also suitable for:

Ina200-x6414-aIna200-x6212-aE27b200100E27b200101

Table of Contents