Panasonic WX-ST600P Operating Instructions Manual page 39

Wireless transmitter and microphone
Hide thumbs Also See for WX-ST600P:
Table of Contents

Advertisement

Phenomenon
Audio from the
microphone unit is not
transmitted
I cannot talk even
after pressing the talk
button
(The talk indicators
remain off)
I cannot charge the
microphone
(The charge indicator
stays off)
I cannot charge the
microphone
(The charge indicator
only stays on for a few
minutes)
Cause/measure
● Is an external device connected to the external
input connector?
¨ When an external device is connected, even
¨
if it is turned OFF, it will take precedence
over the microphone unit, which will stop
audio transmission from the microphone unit.
Disconnect the plug from the external input
connector.
● Is the volume on the receiver, connected
amplifier, etc. high enough?
¨ Adjust the volume with the volume
¨
adjustment knob.
● Is the status of the product "Not talking"? (Is the
talk indicator red?)
¨ Press the talk button.
¨
● Has the paired microphone been deleted by the
operations support software?
¨ Pair the microphone again.
¨
● Is the PTT setting switch set to "PTT ON"?
¨ When set to "PTT ON", you need to keep
¨
pressing the talk button while talking to
output.
● Is the microphone properly inserted into the
charger?
¨ Make sure that the microphone is properly
¨
inserted into the charger.
● Are the batteries already charged?
¨ The batteries may already be fully charged.
¨
Take the microphone out of the charger and
use it as normal.
Reference
page
32
15, 16
25
16, 17
35
35
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wx-st700p

Table of Contents