Table of Contents
Advertisement
Confirming pairing
1
Remove the battery cover
Press on the portion labeled as
the battery cover and slide the cover in the
indicated direction to remove it.
2
Make sure the wireless receiver / extension receiver is turned ON
Make sure that the [POWER] indicator on the wireless receiver / extension receiver
lights green.
Power indicator
3
Set the microphone to pairing confirmation mode
With the microphone powered on, press the [REG] button once to enter pairing
confirmation mode (the status indicator will turn green and orange alternately for five
seconds).
* This illustration shows the WX-ST600P.
28
on the bottom of
Status
indicator
INPUT LEVEL METER OFF/ON
T OFF/ON
A
1
2
3
4
* This illustration shows the WX-SR202P.
SET
REG
SET
REG
N/A
INPUT LEVEL METER OFF/ON
PTT OFF/ON
SENS L/H
Register button
Advertisement
Table of Contents
