Q Pairing with the WX-SR202P / WX-SR204P / WX-SE200P
(wireless connection)
Pair the microphone to a wireless antenna via a wireless connection. Perform the pairing
within the connection range of the wireless antenna connected to the wireless receiver /
extension receiver to which you want to pair the microphone.
1
Remove the battery cover
Press on the portion labeled as
the battery cover and slide the cover in the
indicated direction to remove it.
2
Set the wireless receiver / extension receiver to pairing mode
Make sure that the [POWER] indicator on the wireless receiver / extension receiver
lights green, then press for at least two seconds the [REG] button of the channel to
which you want to pair a microphone.
When the wireless receiver / extension receiver is in pairing mode, the [REG] indicator
of the channel whose [REG] button has been pressed will blink orange. Pairing mode
lasts for 30 seconds, so pair the microphone within this time.
Power indicator
on the bottom of
Register indicator
Register button
SET
REG
A
N/A
1
INPUT LEVEL METER OFF/ON
2
3
PTT OFF/ON
SENS L/H
4
* This illustration shows
the WX-SR202P.
25