Related Manuals for MicRadar R60AFD2
Summary of Contents for MicRadar R60AFD2
- Page 1 60GMilimeterwave Biosensing radar Please read the product instructions carefully and keep them properly before use V1.0 MicRadar Technology (Shenzhen) Co. ,LTD...
- Page 2 R60AFD2-Fall detection tuya WiFi application manual ontents 1. Step 2 of the equipment distribution routine 12 1.Device distribution routine steps 1、Download through the app store: Tuya Smart APP 2、Press and hold the button on the product until the LED light TEL:0755-88602663 sales@micradar.cn...
- Page 3 R60AFD2-Fall detection tuya WiFi application manual is off and then release when it flashes. At this time, the radar resets and enters the network distribution mode. There are two ways to configure the network: (Note: The phone needs to be connected to 2.4Gwifi, not 5Gwifi) Method 1 (Bluetooth): The App interface will pop up "Discover the device to be added:...
- Page 4 R60AFD2-Fall detection tuya WiFi application manual Fill in the relevant wifi information and click "Next" to configure the device. 3、Wait for the APP to configure the wifi network until the network configuration is successful,then the Tuya wifi radar device can be successfully connected.
- Page 5 R60AFD2-Fall detection tuya WiFi application manual TEL:0755-88602663 sales@micradar.cn www.micradar.cn 501, West Block, Phase II, Tian 'an Innovation Technology Plaza, Futian District, Shenzhen...
- Page 6 R60AFD2-Fall detection tuya WiFi application manual 3.60G fall radar application scenarios and function introduction 1.60G fall radar installation scenario restrictions: The fall radar is suitable for indoor bathrooms, kitchens, bedrooms and other scenarios ·It is necessary to avoid fans, etc., which will vibrate...
- Page 7 R60AFD2-Fall detection tuya WiFi application manual · Fall alarm status judgment · Static parking alarm status judgment 4.60G fall radar main function detailed description 1. Judgment of fall alarm status: Fall alarm test: When a person falls and lies on the ground within the radar fall ...
- Page 8 R60AFD2-Fall detection tuya WiFi application manual If it can be removed normally, it means "pass" Example test table format: Testing frequency Whether to cancel the fall pass alarm the first time pass 2. Judgment of static parking alarm status: Stationary parking alarm test: ...
- Page 9 R60AFD2-Fall detection tuya WiFi application manual When the radar state is parked from On the premise that the static stationary to alarm -> none parking alarm state been Recorded radar stationary parking triggered within the range, get up alarm successfully released...
- Page 10 R60AFD2-Fall detection tuya WiFi application manual When a person within the radar detection range enters the trigger, the radar will instantly display the presence status. Switch between different scene When the radar state changes from no modes for testing one - "someone stops for a moment...
- Page 11 R60AFD2-Fall detection tuya WiFi application manual 4. Active/static/stateless judgment: Active state test: When the tester continuously walks or continues to make large movements in the detection area of the fall radar, the active state will be output (“static state” triggers “active state” response time ≤ 1s)
- Page 12 R60AFD2-Fall detection tuya WiFi application manual When the detection area is unmanned, the radar will output the unmanned state after a certain period of time judgment. Leaving the detection range of the selected scene mode When the radar state No trigger, no interference, keep for a certain period of time after Can hold "None"...
Need help?
Do you have a question about the R60AFD2 and is the answer not in the manual?
Questions and answers