2.2 INSTALLATION / OPERATION
1. Power cord:
Connect power to 100V~240VAC single phase power.
2. Power switch (SW1):
I = On,O = Off
3. Forward / Reverse switch (SW2):
Reverse (
) / Forward (
4. Stop:
Press the Stop button to pause all motion and disable all control.
Rotate the Stop button clockwise to reset.
5. Speed Adjustment Knob (VR1):
Rotate clockwise to increase speed, counter clockwise to decrease speed.
6. Foot switch (F.S):
The foot switch is alternative type switch pressing it once and release would activate the roller.
Pressing it the second time to stop the roller.
7. Fuse holder (Fuse):
Overload protection.
)
4