Specifications
See the name plate on the product
Power source
(Automatic voltage conversion)
Charging time
Approx. 15 hours
Power
Approx. 1 W
consumption
Approx. 15 minutes*
Operating time
(at 20 °C (68 °F) when fully charged)
Approx. 130 mL
(Nozzle (for general use): approx.
Tank volume
35 seconds*)
(Orthodontic nozzle: approx.
30 seconds*)
Main unit:
197 (H) x 59 (W) x 75 (D) mm
(7.75 (H) x 2.32 (W) x 2.95 (D) in)
Dimensions
(Not including nozzle)
Charger:
40 (H) x 93 (W) x 98 (D) mm
(1.57 (H) x 3.66 (W) x 3.85 (D) in)
Main unit: Approx. 305 g (Including
Mass
Charger: Approx. 180 g
* When using AIR IN (REGULAR) mode
This product is intended for household use only.
16
EW1213_US.indb
16
nozzle)
Changing the nozzle (Sold separately)
• Optional nozzles with identification ring to allow
several persons to share the main unit.
► Nozzle (for general use)
• If the tip of nozzle (for general use) gets deformed,
please replace with a new nozzle.
• The nozzle is a consumable. The nozzle (for general
use) should be replaced with a new one every
6 months or so due to hygiene reasons, even if its
shape is unchanged.
New nozzle (tip)
Deformed (worn) nozzle (tip)
► Orthodontic nozzle
• Replace the orthodontic nozzle in approx. 3 months. If
the brush bristles are bent out, replace it even within
3 months.
New nozzle
Nozzle with bent out bristles
Part number
Replacement Nozzle for EW1213
EW0950
Nozzle (for general use)
WEW0984
Orthodontic nozzle
2020/06/22
16:53:09