Blurring the Edges of the Image (Flexible Picture)
You can blur the edges of the projected image so that the image blends into
the wall you are projecting on to.
a
Turn on the projector and display an image.
b
button on the remote control to display the Flexible
Press the
Picture menu.
You cannot use this button when displaying the Installation
menu.
a
c
Press the
button to blur the edges of the projected image.
You can reset the function by pressing the
again.
a
d
Press
to close the Flexible Picture menu.
You can reset all settings in the Flexible Picture menu by pressing the
button while displaying the Flexible Picture menu.
a
button
65