Table of Contents
Advertisement
Quick Links
Oyster Sigfox
Getting Started Guide
Revision 1.0 - 14 May 2017
1. INTRODUCTION
The Oyster is a compact, rugged GPS tracking device that has been designed for locating and
tracking non-powered assets such as containers, trailers, skip bins, and others.
The Oyster Sigfox device uses the Sigfox network to transmit its data to the server.
This "Getting Started" guide is designed to help you get your device setup and working as quickly
as possible.
2. CONTACT INFORMATION
For the latest version of this document and other product information please visit our website at
www.digitalmatter.com/support
Please also follow the link to our online knowledgebase where you can find other support
documents and information.
Oyster Sigfox Getting Started
All information provided in this document is subject to legal disclaimers
Revision 1.0 - 14 May 2017
© Digital Matter 2017
Page 1 of 6
Advertisement
Table of Contents
Related Manuals for Digital Matter Oyster Sigfox
Summary of Contents for Digital Matter Oyster Sigfox
- Page 1 The Oyster Sigfox device uses the Sigfox network to transmit its data to the server. This “Getting Started” guide is designed to help you get your device setup and working as quickly as possible.
- Page 2 Take care when handling the PCB that you hold it by the edges, and do not directly touch the circuits to reduce the chance of damage by static. All information provided in this document is subject to legal disclaimers © Digital Matter 2017 Oyster Getting Started Revision 1.0 - 14 May 2017...
- Page 3 Digital Matter 4. BATTERIES Type The Oyster Sigfox uses 3 x 1.5V AA batteries that are readily available from your local supermarket. You can use 1.5V Alkaline or 1.5V Lithium batteries. Lithium batteries are more expensive, but they offer longer battery life and will operate well over a larger temperature range, especially in colder temperatures.
- Page 4 If you wish to replace the batteries and open the housing, be sure to check that the silicon seal is in good condition before closing and sealing the housing again. All information provided in this document is subject to legal disclaimers © Digital Matter 2017 Oyster Getting Started Revision 1.0 - 14 May 2017...
- Page 5 All information provided in this document is subject to legal disclaimers © Digital Matter 2017 Oyster Getting Started Revision 1.0 - 14 May 2017...
- Page 6 You will need the PAC when registering your device. You will need to register and activate the Oyster Sigfox device on your Sigfox airtime account before it will be able to send data on the network. This process can be different depending on who is supplying you the airtime –...
Need help?
Do you have a question about the Oyster Sigfox and is the answer not in the manual?
Questions and answers