Digital Matter Oyster2 User Manual

User's Manual
Oyster2 GPS Tracker
Last Revised 12/3/2020
www.LoneStarTracking.com
Welcome! Thank you for purchasing the ​ O yster2 GPS Tracke ​ r r from LoneStar Tracking. It's the
best GPS tracker available with a dustproof and waterproof IP67 rating. With proper use, this
unit can provide up to 5 years of uninterrupted service protecting assets in all conditions.
This manual will guide you through the setup and installation process as well as take a look at
the software used to monitor your Oyster2 GPS Tracker.
NOTE​ : ​ B EFORE INSTALLING PERMANENTLY​ , please note that the Oyster2 GPS Tracker
uses satellites to receive position information and uses cellular towers to share information with
our server. An unobstructed view of the sky is best but the tracker may work even if hidden.
After initial setup, test the unit where you want to place it to see if there is a clear enough signal
(​ S ubscription ​ ​ D ata Plan ​ required, see the ​ S ection 2 ​ for details).
NOTE​ : Damaging the casing of the Oyster2 GPS Tracker or installing batteries incorrectly may
void its warranty.
1. Batteries
Your package includes ​ ( 3) Energizer Ultimate Lithium batteries​ (may be pre-installed).
The Oyster2 requires (3) AA batteries to operate. While any AA batteries will work, note that
standard AA batteries only last a few days. And while other brands of lithium AA batteries will
last a few years, only the ​ E nergizer Ultimate Lithium ​ batteries (available at most hardware
stores or
LoneStarTracking.com​ ) can deliver up to 5 years of operation.
NOTE​ : When operating the Oyster2 GPS Tracker in an extremely cold environment, we
recommend Lithium/Thionyl Chloride (LTC) batteries (available for purchase at our website)
Installing Batteries
NEEDED​ : Phillips head screwdriver, (3) AA batteries (Energizer Ultimate Lithium batteries
recommended).
To access the Oyster2 GPS Tracker battery compartment, first remove the 6 screws on the
bottom of the unit.