Accessing The Extender's Gui - ActionTec WCB3000N User Manual

Accessing the Extender's GUI

!
To configure the settings of your WCB3000N Wireless Extender:
1. Ensure that your WCB3000 WiFi Extender is connected to your
Actiontec or Zyxel gateway/modem, and that both units are powered
on.
2. Log in to your Actiontec or Zyxel gateway/modem by entering
192.168.1.254 into the address bar of your Internet browser. The IP
address of your WCB3000N should be displayed on the main or
Home page of the Actiontec and on the Status page of the Zyxel.
3. The Extender's GUI "Status" screen appears, as shown below.
!
7