CompAir V-Compact Series User Manual page 2

FOREWORD
These compressors are intended for compressing atmospheric air
and are not suitable for compressing any other gas. They are
designed and manufactured to give optimum performance, with long
life and reliability.
This manual gives the user all the information required to install,
commission and operate the compressors and carry out the regular
schedules for servicing and maintenance which will ensure the
maximum satisfactory service life.
Servicing facilities and the supply of genuine replacement parts are
provided through a worldwide network of CompAir Distributors,
backed up by the AfterMarket division at Redditch. If replacement
parts are needed, the user should contact the local Distributor in the
first instance.
The information given in this manual was correct at the time of
printing but modifications to parts and procedures may be made
without notice which could affect the servicing requirements of the
compressors. Before any servicing or maintenance work is
undertaken the user is advised to contact the local CompAir
Distributor who is supplied with revised and up-dated information.
In any communication concerning the compressor it is essential to
quote the MODEL and SERIAL NUMBER.
Throughout this manual all pressures quoted are gauge pressure
unless otherwise specified.