Table of Contents
Advertisement
en Rapid heating
Use the temperature selector to set the temperature
2.
or grill setting.
a The appliance starts heating after a few seconds.
When the dish is ready, switch off the appliance.
3.
Tips
¡ The most suitable type of heating for your food can
be found in the description of the types of heating.
¡ You can also set a cooking time and an end time
on the appliance.
→ "Time-setting options", Page 10
7 Rapid heating
To save time, you can use the rapid heating to shorten
the preheat time.
Only use rapid heat-up when a temperature of over
100 °C has been set.
After rapid heating, it is best to use the following types
of heating:
¡ 3D hot air
¡ Top/bottom heating
8 Time-setting options
Your appliance has different time-setting options which
ensure that operation can be controlled.
8.1 Overview of the time-setting options
You can use the
button to select the different time-
setting options.
Time-setting
Use
option
Timer
The timer can be set independently
of the operation. It does not affect
the appliance.
Cooking time
If a cooking time has been set for
the operation, the appliance stops
heating automatically once this time
has elapsed.
End
A time at which the operation ends
can be set for the cooking time. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time
Set the time.
8.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set up to 23 hours
and 59 minutes regardless of whether the appliance is
10
Changing the type of heating
You can change the type of heating at any time.
Use the function selector to set the required type of
▶
heating.
Changing the temperature
You can change the temperature at any time.
Turn the temperature selector to set the desired
▶
temperature.
7.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Use the function selector to select rapid heating .
1.
Use the temperature selector to set the required
2.
temperature.
a Rapid heating starts after a few seconds.
a When the rapid heating process ends, an audible
signal sounds and the heating indicator goes out.
Use the function selector to set a suitable type of
3.
heating.
4.
Place the food in the cooking compartment.
on or off. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
Note: The timer and cooking time cannot count down
at the same time. If a cooking time has already been
set, you cannot set the timer.
Press
repeatedly until is selected in the dis-
1.
play.
Use the
or
button to set the timer duration.
2.
Button
Recommended value
5 minutes
10 minutes
Up to 10 minutes, the timer duration can be set in
30-second increments. The time increments be-
come bigger as the value increases.
a The timer starts and the timer duration begins to
count down after a few seconds.
a An audible signal sounds and the timer duration is
zero in the display when the timer duration has
elapsed.
Once the timer duration has elapsed
3.
Press any button to switch off the timer.
‒
Changing the timer
The timer duration can be changed at any time.
Requirement: is highlighted in the display.
Use the
or
button to change the timer duration.
▶
a The appliance applies the change after a few
seconds.
Advertisement
Table of Contents
