LaCie 2big Quadra Enterprise Class
User Manual
2. Setting Up Your LaCie 2big
This section covers the installation and configuration of your LaCie
2big Enterprise Class. Follow the steps below to power on and con-
figure your LaCie 2big:
Step 1 – Connect the Interface Cable (section 2.1)
Step 2 – Turn On the 2big (section 2.2)
Step 3 – Configuring RAID (section 3)
TECHNICAL
NOTE: The LaCie 2big Quadra Enterprise Class
comes with no encryption configured. If you want to set up encryption,
install the LaCie Desktop Manager and refer that application's user
manual.
IMPORTANT
INFO: LaCie Enterprise Class encryption offers a
very high level of protection for your most important data. Due to
the strength of the encryption, data recovery will not be possible in
the unlikely event of disk or part failure.
• D
n
P
esign by
eil
oulton
Setup
page 12