Pairing With The Wx-Sr202P / Wx-Sr204P / Wx-Se200P (Wired Connection) - Panasonic WX-ST400 Operating Instructions Manual

Pairing
■ Pairing with the WX-SR202P / WX-SR204P / WX-SE200P
(wired connection)
Pair the microphone to a wireless receiver / extension receiver via a wired connection. The
wired connection uses a USB 2.0 cable (micro type B male to type A male; locally
procured) and a conversion cable (type A female to micro type B male; locally procured).
1
Remove the battery cover
Press on the portion labeled as
the battery cover and slide the cover downwards to
remove it.
2
Connect the microphone to the wireless receiver / extension receiver
Connect the [SET] connector of the microphone to the [SET] connector of the wireless
receiver via a USB 2.0 cable (micro type B male to type A male; locally procured) and
a conversion cable (type A female to Micro type B male; locally procured). Also when
you wish to pair with an extension receiver, connect the cable to the wireless receiver
to which the extension receiver is connected.
22
on the back of
A