TP-Link EC220-F5 User Manual page 73

Chapter 6
4 When the WPS LED is on, the client device has successfully connected to the router.
Method 2: Use the "Connect" button on the web management page
Use this method if your client device has a WPS button.
1 Visit http://tplinkwifi.net
for the router.
2 Go to Advanced
3 Click Connect on the page.
4 Press the WPS button of the client device directly.
5 The WPS LED of the router flashes for about 2 minutes during the WPS process.
6 When the WPS LED is on, the client device has successfully connected to the router.
Method 3: Enter the router's PIN on your client device
Use this method if your client device asks for the router's PIN.
1 Visit http://tplinkwifi.net
for the router.
2 Go to Advanced
3 Take a note of the current PIN of the router. You can also click the
to get a new PIN.
4 Enter the router's PIN on the client device. (The default PIN is also printed on the
label of the router.)
5 The WPS LED flashes for about 2 minutes during the WPS process.
or http://192.168.0.1, and log in with the password you set
> Wireless > WPS page.
or http://192.168.0.1, and log in with the password you set
> Wireless > WPS, and enable
Customize Your Network Settings
Router's PIN.
Generate button
68