Table of Contents
Advertisement
en operation
To pause the programme, after ap-
2.
prox. 10 minutes, press
To resume the programme, after
3.
the desired soaking time, press
.
13.9 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Requirement: A programme has
started.
→ "Starting the programme", Page 35
Press
.
1.
The appliance pauses.
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
.
5.
13.10 Cancelling the pro-
gramme
Press
.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→ "Programmes", Page 28
Remove the laundry.
3.
→ "Unloading the laundry",
Page 36
36
13.11 Resuming the pro-
.
Requirements
¡ Rinse Stop is activated.
→ "Buttons", Page 27
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the Spin programme or a pro-
1.
gramme for draining the water.
→ "Programmes", Page 28
Press
2.
13.12 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.13 Switching off the appli-
Press
1.
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
Leave the appliance door and de-
3.
tergent drawer open so that resid-
ual water can evaporate.
gramme when the pro-
gramme status is Rinse
Hold
.
ance
.
Advertisement
Table of Contents
