Table of Contents

Advertisement

Available languages

Available languages

Installation

4
WARNING: When
A
the locking latch (4)
is not locked, the ap-
pliance does not work.
7. Place the fruit juice container (7)
under the fruit juice tap (11).
8. Plug in the appliance.
9. Separate the seeds of and/or
peel the fruit/vegetable that you
will process.
A
WARNING:
seeds can damage
the filter.
WARNING: Start
A
the fruit juicer 10 sec-
onds after starting
the appliance.
Cut the food you will
C
put into the transpar-
ent feeding channel
(2) at the appropriate
size.
10. Put the appropriately sized
vegetables and/or fruits in the
feeding channel (2) and place
the pusher (1) on them.
11. Bring the on/off switch (10) to
on (I) position.
Juice Extractor / User' s Manual
12. Push the fruit/vegetable to-
wards the bladed filter (8) with
the pusher (1).
A
Hard
13. When the process is complete,
bring the on/off switch (10) to
"0" position and wait for it to
stop.
14. Unplug the appliance.
C
4.2 Disassembly
To disassemble the parts of the ap-
pliance, follow the steps in the in-
stallation backwards (see 4.1).
WARNING: If the
filter (8) fills during
use, turn off the ap-
pliance by bringing
on/off switch to the
"0" position. After
the appliance has
stopped completely,
clean the filter and
pulp container (11)
(see 5.1).
Before removing the
fruit juice container,
you can push the
fruit juice tap (11)
upwards to prevent
flowing.
13 / EN

Advertisement

Table of Contents
loading

Table of Contents