Siemens SIPROTEC 5 7VE85 Manual page 15

Dimensions of Device Rows
Type of
Construction
(Maximum
Dimensions)
Type of construc-
tion
Flush-mounting
device
Surface-
mounted device
with integrated
on-site operation
panel
Surface-
mounted device
with detached
on-site operation
panel
Expansion Module Dimensions
Type of Construction (Maximum Dimensions)
Flush-mounting device
Surface-mounted device with integrated on-site oper-
ation panel
Surface-mounted device with detached on-site opera-
tion panel
Plug-In Module Dimensions
Type of Construction (Maximum Dimensions)
USART-Ax-xEL, ETH-Bx-xEL
USART-Ax-xFO, ETH-Bx-xFO (without protection
cover)
ANAI-CA-4EL
ARC-CD-3FO
Minimum Bending Radii of the Connecting Cables Between the On-Site Operation Panel and the Base Module
Fiber-optic cable
D-Sub cable
SIPROTEC 5, Paralleling Device, Manual
C53000-H5040-C071-1, Edition 05.2018
Width over all x Height over all x Depth (incl. Current Terminal), Width and Depth
Each Rounded up to the Next Full mm (in Inches)
1/3 1/2
150 mm x 225 mm x
266 mm x 266 mm x
229 mm 229 mm
(5.91 x 10.47 x (8.86 x 10.47 x
9.02) 9.02)
150 mm x 225 mm x
314 mm x 314 mm x
337 mm 337 mm
(5.91 x 12.36 x (8.86 x 12.36 x
13.27) 13.27)
150 mm x 225 mm x
314 mm x 314 mm x
230 mm 230 mm
(5.91 x 12.36 x (8.86 x 12.36 x
9.06) 9.06)
2/3 5/6
300 mm x 375 mm x
266 mm x 266 mm x
229 mm 229 mm
(11.81 x 10.47 x (14.76 x 10.47 x
9.02) 9.02)
300 mm x 375 mm x
314 mm x 314 mm x
337 mm 337 mm
(11.81 x 12.36 x (14.76 x 12.36 x
13.27) 13.27)
300 mm x 375 mm x
314 mm x 314 mm x
230 mm 230 mm
(11.81 x 12.36 x (14.76 x 12.36 x
9.06) 9.06)
Width x Height x Depth, Width and Depth Each
Rounded up to the Next Full mm (in Inches)
75 mm x 266 mm x 229 mm
(2.95 x 10.47 x 9.02)
75 mm x 314 mm x 337 mm
(2.95 x 12.36 x 13.27)
75 mm x 314 mm x 230 mm
(2.95 x 12.36 x 9.06)
Width x Height x Depth (in Inches)
61 mm x 45 mm x 120.5 mm
(2.4 x 1.77 x 4.74)
61 mm x 45 mm x 132.5 mm
(2.4 x 1.77 x 5.22)
61 mm x 45 mm x 119.5 mm
(2.4 x 1.77 x 4.7)
61 mm x 45 mm x 120.5 mm
(2.4 x 1.77 x 4.74)
R = 50 mm
Pay attention to the length of the cable protection
sleeve, which you must also include in calculations.
R = 50 mm (minimum bending radius)
Technical Data
12.1 General Device Data
1/1
450 mm x
266 mm x
229 mm
(17.72 x 10.47 x
9.02)
450 mm x
314 mm x
337 mm
(17.72 x 12.36 x
13.27)
450 mm x
314 mm x
230 mm
(17.72 x 12.36 x
9.06)
715