Table of Contents
Advertisement
To edit scale system setup:
Press Menu
Use Up arrow to change menu selection
Use Down arrow to toggle value
Press Freeze to save changes or
The parameters listed below can be changed through the Menu
Bed Exit Alarm on 0-45% of patient weight in 5% increments. 5-15% high
sensitivity, 20-30% medium sensitivity, 35-45% low sensitivity.
Bed Exit Alarm on time 30-300 seconds in 30 second increments. Alarm will
sound for the amount of time desired between 30-300 seconds.
Units Kg or Lb
Backlight intensity 0-10 in 1 unit increments
To correct shown patient weight
If the shown patient weight is known to be wrong press and hold the Freeze
button, then use the Up and Down buttons to correct the shown weight. When
adjustments are complete press the Freeze button to exit.
Weigh to exit without
saving changes
31
Advertisement
Table of Contents
