Table of Contents
Advertisement
Lockout control
To lock/unlock a function from being used press and hold the
up/down arrow button of the function to be locked/unlocked.
A yellow LED is lit above the buttons of locked functions.
Head/Knee/Bed/Tilt (trendelenburg/ reverse trendelenburg)
Press and hold the button of the function desired +
or
Cardio chair position
Press and hold the
button.
When the cardio chair button is pushed the head and knee will raise
simultaneously to their highest position, then the foot end of the bed will
lower (reverse tilt).
Level All
Press and hold the
button.
When the level all button is pushed the head and knee sections will
lower and then the bed will level at the current height.
Initialization: The bed must be initialized before first use and after power
is interrupted/disconnected for Level All function to work properly. To
initialize, press the bed up button until the bed is raised to its full up
position. If the bed is already in the full up position lower the bed slightly,
then lift. Once the bed is lifted to its full up position the bed is initialized.
12
Advertisement
Table of Contents
