Function & Basic Operation - GENDRON 3875 User Manual

Function & Basic Operation
Initialization: The bed must be initialized before first use and after power is
interrupted/disconnected for Level All function to work properly. To initialize,
press the bed up button until the bed is raised to its full up position. If the bed is
already in the full up position lower the bed slightly, then lift. Once the bed is
lifted to its full up position the bed is initialized.
Patient Pendant
Pendant control allows easy operation of bed controls. Press and hold button to
operate each function.
1) Raise and lower head section
2) Raise and lower knee section
3) Nurse call
↑
1) Head Up and Down
↑
2) Knee Up and Down
3) Nurse Call
↓
↓
10