System meeting the following requirements is needed in order to use USB
2.0 operation with this drive.
Computer that is equipped with a USB 2.0 – compliant USB connector or
PCI adapter card, and on which the USB 2.0 EHCI (Enhanced Host
Controller Interface) driver software
The USB 2.0 EHCI driver software is supplied with currently available PCI
adapter cards that conform to USB 2.0. Further, Microsoft has released the USB
2.0 EHCI driver software for Windows XP, therefore it is also possible to use this
driver software with Windows XP.
If you want to know in detail, please contact your USB 2.0 adapter dealer or consult
your PC manufacturer, or consult the Microsoft Corporation Web site.
To achieve maximum Record & Write speed your system may require
data to be copied first to the computer's hard drive rather than directly
from another source disc or drive.
This unit can be operated in the system environment explained here.
Pentium 4 2.8GHz or Higher with IBM PC or Compatible.
512MB of RAM or greater.
10GB or more free space. (The free space needed for writing
depends on the quantity of data.)
USB port or IEEE1394 port
For Software installation
Windows 2000 Professional(SP4)/XP(Home Edition/
Professional/SP2), Direct X 9.0 or Higher is required.
CD-R : LG, Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden,
CD-RW : LG, Ricoh, Mitsubishi Kagaku Media, Verbatim discs
DVD-R : Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden are
DVD±R DL discs
DVD-RW : JVC, Mitsubishi Kagaku Media, TDK, RITEK are
DVD+R : Mitsubishi Kagaku Media, Verbatim are recommended.
DVD+RW : TDK, FujiFilm, Ricoh, CMC, Mitsubishi Kagaku
DVD-RAM : Maxell, Panasonic are recommended.
DVD±R DL : Mitsubishi Kagaku Media, Verbatim are recommended.
* Compatibility problem in write/read function may occur with some media depending on
the media manufacturing quality.
has been installed.
TDK, Ritek or HP discs are recommended.
Media are recommended.