System Requirements - LG GDR-8161B Owner's Manual

Dvd-rom drive
Hide thumbs Also See for GDR-8161B:
Table of Contents

Advertisement

Features
Features
I E-IDE interface
I Data transfer rate (DVD-ROM max-16X-speed: 22,100KB/sec,
CD-ROM max-48X-speed : 7,200KB/sec)
I Access time (DVD-ROM: 120ms Random access-Typical,
CD-ROM: 100ms Random access-Typical)
I Intelligent 256KB data buffering system
I Small CPU bandwidth (MPC spec.)
I Motorized tray loading system
I Horizontal/Vertical mounting support
I Designed for internal mounting
I Emergency eject support
I Supports Windows 95, 98, 2000, ME & XP Plug-and-Play ATAPI protocol
I Read compatible for DVD-R, DVD+RW, DVD-RW & DVD-RAM discs
I Photo CD multisession support
I Supports Region playback control Phase II

System Requirements*

I IBM PC AT or compatible, Pentium-266MHz processor or higher
(higher recommended).
I A minimum of 16MB memory (higher recommended).
I A suitable free standard 5
I MS-DOS version 3.1 or higher. (Windows 95 and above recommended).
I 3
/
" 1.44 Mb Floppy Drive.
1
2
I An existing IDE controller with an available cable connector or a new IDE controller
(recommended with IDE PIO Mode 4 capability) that you will need to install.
* Please note: Certain software (i.e. particularly those including Video playback) may
require a considerably increased specification PC to give acceptable results.
While this DVD-ROM drive can read DVD-video discs, decoding them to display on
your pc's monitor requires separate MPEG decoding that is done by separate hardware
(either an MPEG decoder card or MPEG decoding done by your video card), or
separate software that you install to do MPEG decoding. These items are separate and
are not included with this DVD-ROM drive.
/
" internal drive bay.
1
4
E-4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents