Valet Take-Over; Short-Run/Turbo - Clifford 562C User Manual

Valet ® Take-Over
The Valet ® Take-Over feature allows the vehicle to remain running
after the key has been removed from the ignition. This feature is
useful for occasions when you wish to exit and lock the vehicle for
short periods of time, but would like to leave the motor running
and the climate controls on.
To perform Valet
1. Before turning off the engine, press and release
transmitter twice in 3 seconds (or press and release the
optional momentary switch).
2. Turn the ignition key to the OFF position. (The engine will
stay running.)
3. The engine will run until the pre-programmed time elapses or
a shut-down input is received. (See the previous Remote Start
section for a complete list of shut-down inputs.)
NOTE: This feature will not work if the brake pedal is being pressed.

Short-Run/Turbo

Short-run turbo mode keeps the engine running after arriving at
you destination for a programmable period of 1, 3 ,5 or 10 min-
utes. This allows the system's timer to conveniently cool down the
turbo after you have left the vehicle.
To activate:
1. Park the vehicle and set parking brake.
14
® Take-Over:
on the
2004 Directed Electronics, Inc.
©