Part Names And Functions - Pacific VPC-HD10 Operational Manual

PACIFIC CORPORATION
2-23-3 EBISU-MINAMI SHIBUYA-KU TOKYO 150-0022 JAPAN
6.

Part Names and Functions

5
7
(NO MOUNT)
① Power Input and Video Output
With the bundled harness, power input and video output signals are connected to a monitor.
Please refer to Chapter 7, "External connector pin assignment".
② OSD Operational Switch Connector
With the optional harness, OSD operational switch is connected.
Please refer to Chapter 7, "External connector pin assignment".
③ Remote Control Connector
Optional remote control cable (RE-300) is connected.
With connecting the remote control cable (RE-300) to a PC, serial communication via RS-232C is valid.
Please refer to the other materials for the communication details. (To be prepared)
④ Dedicated board camera lens
Lenses are optional.
⑤ Camera Mounting Holes
With bundled attachment screws, mount the camera.
⑥ Extended Connectors (Not implemented. Can be implemented on request.)
⑦ DC IRIS Connectors (Not implemented. Can be implemented on request.)
4
CN2
2010 Pacific Corporation.
TEL: +81-3-3760-8881 FAX : +81-3-3760-8882
3
8
CN5 CN4
2
(NO MOUNT)
CN6
6
Tokyo H.Q.
1
6
CN3