Camera Operating Instructions; Switch Operation Without Osd Menu; Pc Operation Via Rs232C; Switch Operation With Osd Menu - Pacific VPC-HD10 Operational Manual

Color hd(720p)board camera
Table of Contents

Advertisement

PACIFIC CORPORATION
          2-23-3 EBISU-MINAMI SHIBUYA-KU TOKYO 150-0022 JAPAN
8.

Camera Operating Instructions

There are 3 different operating methods, operating with OSD menu, operating without OSD menu, and operating
via PC with dedicated remote control cable connected to the remote control terminals. Depending on its
operating methods, selectable camera settings are different. Please refer to the selectable settings by each
operational method as below.

Switch Operation without OSD Menu

8.1.
Operational Functions
EZOOM, PAN, TILT, and Video Format Selection
EZOOM Operation
EZOOM can be operated with [UP] KEY and [DOWN] KEY.
With [DOWN] KEY, it goes to TELE side, and with [UP] KEY, it goes to WIDE side.
Except when EZOOM is x1.00, it goes to EZOOM→PAN→TILT→EZOOM every time when
[BACK] KEY is pushed. PAN and TILT values can be set as well.
* When EZOOM is x1.00, PAN and TILT will automatically go back to the center of the image.
Display Format Selection
Video format can be changed as follows, pushing [ENTER] KEY while pushing [BACK] KEY.
720p/60 Y/PbPr → 720p/59.94 Y/PbPr → 720p/50 Y/Pb/Pr →
720p/60 RGB → 720p/59.94 RGB → 720p/50 RGB → 720p/60 Y/Pb/Pr
* The selected settings with operations explained the above can not be saved as they are.
To save those settings, EXIT→SAVE shall be done by OSD displayed operation.
* Initial setting is 720p/59.94 Y/Pb/Pr.
8.2.

PC Operation via RS232C

Camera can be controlled via a PC using camera control software, with dedicated remote control cable (RE-300)
connected to the remote control terminal.
8.3.

Switch Operation with OSD Menu

[ENTER] KEY:
To enter into the menu with pushing this button for long.
In the menu, this button works to go to the next menu, and works as [→] KEY.
[BACK] KEY: In the menu, this button works to go back to the prior menu, and works as [←] KEY.
[UP] KEY:
To select items in the menu.
When operating volume type menu, this button makes the value to +direction.
[DOWN] KEY: To select items in the menu.
When operating volume type menu, this button makes the value to −direction.
TEL: +81-3-3760-8881 FAX : +81-3-3760-8882
2010 Pacific Corporation.
9
Tokyo H.Q.

Advertisement

Table of Contents
loading

Table of Contents