BMW X1 2018 Owner's Manual page 82

CONTROLS
Manual operation
Operate the unlocked tailgate manually with a
slow and smooth motion.
To close the tailgate fully, press down lightly
only. Closing occurs automatically.
Driver profile
Concept
In the driver profiles, individual settings for sev‐
eral drivers can be stored and called up again
when required.
General information
There are three driver profiles with which per‐
sonal vehicle settings can be stored. Every re‐
mote control has one of these driver profiles as‐
signed.
If the vehicle is unlocked using a remote control,
the assigned personal driver profile will be acti‐
vated. All settings stored in the driver profile are
automatically applied.
If several drivers use their own remote control,
the vehicle will adjust the personal settings dur‐
ing unlocking. These settings are also restored, if
the vehicle has been used in the meantime by a
person with a different remote control.
Changes to the settings are automatically stored
in the driver profile currently activated.
If another driver profile is selected via iDrive, the
settings stored in it will be applied automatically.
The new driver profile is assigned to the remote
control currently used.
There is an additional guest profile available that
is not assigned to any remote control. It can be
used to apply settings in the vehicle without
changing the personal driver profiles.
Functional requirements
For the system to be able to identify the driver
profile associated to a particular driver, the de‐
82
Opening and closing
Online Edition for Part no. 01402120596 - II/18
tected remote control must be clearly allocated
to the driver.
This is the case when:
▷ The driver is only carrying his or her own re‐
mote control.
▷ The driver unlocks the vehicle.
▷ The driver gets into the vehicle through the
driver's door.
Settings
The settings for the following systems and func‐
tions are stored in the active profile. The scope
of storable settings depends on country and
equipment.
▷ Unlocking and locking.
▷ Lights.
▷ Climate control.
▷ Radio.
▷ Instrument cluster.
▷ Programmable memory buttons.
▷ Volumes, tone.
▷ Control Display.
▷ Navigation.
▷ PDC Park Distance Control.
▷ Rearview camera.
▷ Head-up Display.
▷ Driving Dynamics Control.
▷ Seat position, exterior mirror position, steer‐
ing wheel position where applicable.
Both the positions saved via the seat memory
and the last position set are saved.
▷ Intelligent Safety.
Profile management
Selecting a driver profile
Regardless of the remote control in use, a differ‐
ent driver profile may be activated. This allows
you to call up personal vehicle settings, even if