BMW X1 2018 Owner's Manual page 140

CONTROLS
Resetting average values
Press and hold button on turn signal lever.
Engine temperature display
Depending on the vehicle equipment, the current
engine temperature is displayed, based on a
combination of the coolant temperature and en‐
gine oil temperature. As soon as the optimum
operating temperature has been attained, the in‐
dicator is in the center position.
If the engine oil or coolant, and thus the engine,
become too hot, a Check Control message is
displayed too.
Check the coolant level, refer to page 269.
Distance to destination
Depending on the vehicle equipment, the dis‐
tance remaining to the destination is displayed if
a destination is entered in the navigation system
before the trip is started.
The distance to the destination is adopted auto‐
matically.
Time of arrival
Depending on the vehicle equip‐
ment, the estimated time of arrival
is displayed if a destination is en‐
tered in the navigation system be‐
fore the trip is started.
The time must be correctly set.
140
Displays
Online Edition for Part no. 01402120596 - II/18
Onboard Computer on the
Control Display
Concept
The Onboard Computer displays different vehi‐
cle data on the Control Display, such as average
values.
General information
Two types of Onboard Computers are available
on the Control Display:
▷ "Onboard info": average values, such as the
fuel consumption, are displayed. The values
can be reset individually.
▷ "Trip computer": the values deliver an over‐
view of a certain distance and can be reset as
often as necessary.
Calling up the Onboard Computer or
trip computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Onboard info" or "Trip computer"
Resetting the Onboard Computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Onboard info"
4. "Consumption" or "Speed"
5. "OK"
Resetting the trip computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Trip computer"
4. Move the Controller to the left, if needed.