BMW X1 2018 Owner's Manual page 276

MOBILITY
wiper fluid with the screwdriver from the on‐
board vehicle tool kit.
2. Turn the cover counterclockwise and re‐
move.
3. Pull the bulb holder directly to the rear, ar‐
row 1, and remove.
4. Remove the bulb from the bulb holder.
5. Install the new bulb with bulb holder in re‐
verse order of removal.
In doing so, ensure that the bulb tab is cor‐
rectly positioned in the headlight housing and
the bulb holder perceptibly engages.
6. Close the headlight housing with the lid.
Make sure that the lid engages.
276
Replacing components
Online Edition for Part no. 01402120596 - II/18
High beams/headlight flasher
55-watt bulb, H7.
1. Turn the cover counterclockwise and re‐
move.
2. Pull the bulb holder directly to the rear, ar‐
row 1, and remove.
3. Remove the bulb from the bulb holder.
4. Install the new bulb with bulb holder in re‐
verse order of removal.
In doing so, ensure that the bulb tab is cor‐
rectly positioned in the headlight housing and
the bulb holder perceptibly engages.
5. Close the headlight housing with the lid.
Make sure that the lid engages.