BMW X1 2018 Owner's Manual page 204

CONTROLS
Settings
▷ Ventilation for cooling:
Direct vent in your direction when car's inte‐
rior is too hot.
▷ Draft-free ventilation:
Adjust the vent to let the air flow past you.
Ventilation in the rear
▷ Lever for changing the air flow direction, ar‐
row 1.
▷ Thumbwheel for variable opening and closing
of the vents, arrow 2.
Parked-car ventilation
Concept
The parked-car ventilation ventilates the car's in‐
terior and lowers its temperature, if needed.
General information
The parked-car ventilation can be switched on
and off directly or by using two preset activation
times. The system remains switched on for
30 minutes.
The parked-car ventilation system is operated via
iDrive.
Functional requirements
▷ Direct operation: vehicle is in radio-ready
state.
204
Climate control
Online Edition for Part no. 01402120596 - II/18
▷ Direct operation or preset activation time:
does not depend on external temperature.
▷ Battery is sufficiently charged.
If parked-car ventilation is switched on, the
vehicle battery will be discharged. Thus, limit
the maximum activation time to save the ve‐
hicle battery. The system will be available
again after the engine is started or after a
short trip.
▷ Make sure that the vehicle's date and time
are set correctly.
▷ Open the vents to allow air to flow out.
Switching on/off directly
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. If necessary, "Climate functions"
4. "Activate comfort ventilation now"
The symbol on the automatic climate control
flashes if the system is switched on.
Preselecting the activation time
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. If necessary, "Climate functions"
4. "Comfort ventilation"
5. Select the desired activation time.
6. Set the desired time.
Activating the activation time
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. If necessary, "Climate functions"
4. "For start time at:"
Activate the desired activation time.